Instruction For Use (IFU):
SkyStream®
Anti-Legionella / Bacteria mounted showerheads
-
Model MWT-3100, MWT-3110, MWT-3120 / MWT-3950S
-
QF10175WH
SkyStream®
Mounted Ultra-Filtration Showerhead for Antibacterial Protection
SkyStream® mounted shower heads are equipped with an innovative hollow-fiber membrane embedded within the showerheads to protect against waterborne pathogens such as Legionella, NTM (Nontuberculous Mycobacteria), E. Coli, Salmonella, and more, which can cause severe lung infections.
SkyStream® mounted shower heads ensure the provision of 6,500 liters / 1,720 gallons and up to 90 days of safe and pure water, contingent upon the original water quality.
With an ultra-filtration pore size of 0.08 µm, we provide the highest level of protection against waterborne bacteria, fully compliant with U.S. FDA, USP, and EMA standards for sterile filtered water. Our filters are also certified to ASTM F838-2015ae for Legionella reduction, achieving Log 8 (99.999999%) effectiveness, and are CE marked following EU safety and conformity standards, including the EU Drinking Water Directive (2020/2184) and EN-16421.
For use in hospitals, clinics, dental, emergency showers and other medical facilities, including skilled nursing and long-term care facilities. Ideal for clinical areas with a heightened risk of hospital-acquired infections (HAIs), such as intensive care units (ICU), neonatal care, oncology, burn centers, and transplant units.
* Filter capacity is influenced by local water conditions, the concentration of microparticles (SDI), and pre-filtration. SDI is measured according to ASTM D4189-95 standards. It is recommended to replace the filter cartridge every 90 days for optimal performance.
SkyStream® Certification
-
ASSE LEC 2011 – 2022: U.S. Water Engineering Association for Bacteria Reduction. Tested for material safety and microbiological performance This product has been certified by ASSE to ASSE LEC 2011 – 2022 for bacteria reduction when used in a 2-stage system with QF10177WT / QF10202WH.
-
NSF/ANSI 53: Tested & certified according to the Cycle and Hydrostatic test requirements described in Section 5.4.4 and 5.4.2 of NSF/ANSI 53-2019
-
ASTM F838-20 Tested & certified by IAPMO for ASTM F838-15ae1 Legionella log 8 reduction.
Surface Disinfection of the SkyStream®
The following commonly used cleaning solutions are suitable for sanitizing and maintaining the In-Line Pureflow® System during routine servicing. Regular wiping or spraying with these solutions will not affect the system's appearance or functionality, even in white. Please note that the system should remain connected throughout the cleaning process and should not be disconnected or dipped at any time.
Recommended Cleaning Solutions:
-
Solution A: 70% denatured ethanol in water
-
Solution B: 25 ppm active chlorine in water
-
Solution C: 0.5% quaternary ammonium solution
-
Solution D: 0.5% hypochlorous acid solution
SkyStream®
COMPONENTS
Skystream® models:
MWT-3100, MWT-3110, MWT-3120 / MWT-3950S
QF10175WH
Diameter (nominal)
5.7" (14 cm)
Weight (nominal)
88g / 3.1 oz
Flow Rate
There is no actual loss in the water flow.
EPA WaterSense Maximum Flow rate 1.8 gpm and 6.8 L/min
Temperature
Continuous influent temperature 60 °C (140 °F). Maximum influent temp. 70
°C (158 °F) for a total cumulative period of 30 mins over the life of each Filter Capsule
Max. Operating Pressure
580 psi (40 bar) at continuous 60°C (140°F) influent temperature
Capacity
6,500 liters (1,720 gallons)
Main Materials of Construction
Polypropylene (PP)
Pathogenic Reduction
99.999999% - Log 8
WARNING
The following commonly used cleaning solutions are suitable for sanitizing and maintaining the Shower System during routine servicing. Regular wiping or spraying with these solutions will not affect the system's appearance or functionality, even in white. Please note that the system should remain connected throughout the cleaning process and should not be disconnected or dipped at any time.
This system is designed for use with water supplies that meet public water system standards or have been confirmed as microbiologically safe through routine testing. It has been tested to ensure protection against occasional accidental microbiological contamination of otherwise safe drinking water.
For optimal performance, this system requires all functional components to be installed in the correct order, following the provided installation and maintenance instructions. Failure to do so may result in the system not functioning as intended.
The system and installation must comply with all applicable state and local laws and regulations. For any questions or assistance, please contact our customer service team.
WARNING: Always wear protective gloves when installing or removing the filter. Direct contact with internal components can compromise hygiene and pose a contamination risk. Failure to use gloves may void warranty coverage.
About Mentor Water technologies
Mentor Water Technologies specializes in the development and manufacturing of premium medical-grade water filtration systems. Engineered and produced in the Netherlands, our filters are designed to provide superior protection against harmful pathogens, including Legionella, E. Coli, and other waterborne contaminants. With an emphasis on innovation, quality, and stringent certification standards, Mentor Water Technologies offers reliable solutions for healthcare facilities, industries, and residential use. Our commitment to Dutch craftsmanship ensures that each product delivers outstanding performance, long-lasting durability, and peace of mind. Trusted by professionals worldwide, we continue to set the benchmark in water filtration technology.
Manufacturer: Benelux B.V, Korenbloemweg 79, Almere 1338XT, Netherlands +31 61 419 04 90
Warranty: Up to 18 months from delivery in sealed packaging, subject to proper storage and use per manufacturer guidelines.